Spherical Tang – Snap Ring (Base End)
Material: 50 KSI Min Yield Plate Drilled & Tapped for ¼”-28 Zerk (Grease) Fitting Drilled With ¼” Mounting Location Hole Mount Machined for Snap Ring to Retain Spherical Bearing
Material: 50 KSI Min Yield Plate Drilled & Tapped for ¼”-28 Zerk (Grease) Fitting Drilled With ¼” Mounting Location Hole Mount Machined for Snap Ring to Retain Spherical Bearing
Material: 50 KSI Min Yield Plate Drilled & Tapped for ¼”-28 Zerk (Grease) Fitting Drilled With ¼” Mounting Location Hole Mount Machined for Snap Ring to Retain Spherical Bearing
Material: 50 KSI Min Yield Plate Drilled & Tapped for ¼”-28 Zerk (Grease) Fitting Drilled With ¼” Mounting Location Hole
Material: 50 KSI Min Yield Plate Drilled & Tapped for ¼”-28 Zerk (Grease) Fitting
Material: Forging Weldment or Ductile Iron
Material: Forging, Weldment, or Cast Ductile Iron Drilled & Tapped for 4 Mounting Bolts Includes Spherical (Self-Aligning) Bearing Note: Cast ductile iron clevis brackets must not be welded in place
Material: 05 thru 13 C.F. Bar Material, 17 thru 40 Steel Plate Drilled & Tapped for Thread on Rod Design
Material: 05, 07, 10 are Forged Steel, 13 & Up is Cast Ductile Iron Drilled & Tapped for Thread on Rod Design
Material: 1144 Steel Both Ends Machined to Accept Retainer Rings Nitrotec Treated Surface
Material: 1144 Steel Drilled Thru Both Ends for Cotter Pins Nitrotec Treated Surface
Material: CD 1018 (Cold Drawn Steel Bar) NO Hole: Drill / Bore Pin Mounting Hole as Required Welds onto Base or Rod Ends
Material: CD 1018 (Cold Drawn Steel Bar) NO Hole: Drill / Bore Pin Mounting Hole as Required Welds onto Base or Rod Ends
Material; A-36 Plate Mounting Hole Pre-Machined Drilled & Tapped for ¼”-28 Zerk (Grease) Fitting Welds onto Base or Rod Ends
Material: A-36 Plate NO Hole; Drill / Bore Pin Mounting Hole as Required Welds onto Base or Rod Ends
Material: A-36 Plate Welds onto Base or Rod Ends
Material: Forging, Weldment, or Cast Ductile Iron Drilled & Tapped for 4 Mounting Bolts Note: Cast ductile iron clevis brackets must not be welded in place
Material: 1026 CDS (Cold Drawn Seamless Mechanical Tubing) Drilled & Tapped for ¼”-28 Zerk (Grease) Fitting Drilled With ¼” Mounting Location Hole
Material: Forging, Weldment, or Cast Ductile Iron Drilled & Tapped for 4 Mounting Bolts Note: Cast ductile iron clevis brackets must not be welded in place
Alignment couplers are designed to simplify alignment issues, resist vibrational loosening, and allow excellent freedom of movement 1/16 Radial Float 2° High Tensile, Hardened & Blackened Steel Threaded Design